Round cover for plastic chimney flue

Tappo tondo per basse temperature con volantino

This product is designed to be installed in flues with high rates of condensate where there is a T tube union, so as to allow inspection.
The round plug is composed of two elements, one outside, covering the pipe, the other inside, going into the pipe itself.
Between the two elements there is a silicone seal. This seal is temperature and condensate for GAS resistant, temperature class T140, homologated by the IMQ AT15S0479252-03 of 01/12/2015.
This seal, under compression by means of an eccentric handle or handwheel, expands when getting on contact with the internal surface of the pipe. This creates a sealing effect against the smokes passing through the flue and the condensates inside it.
If necessary, the compression of the seal can be modified by means of a threaded pin integrated in the handle or handwheel.
The product is made of the following materials:
– Metal parts: sp. 10/10 AISI 304/316 BA-2B or copper: Cu DHP UNI 5649/1
– Handle or handwheel: of moisture and weather-resistant plastic with temperatures between -20°C and + 240°C.

* ( Not Available )
## ( To depend of material request )
CODE DESCRIPTION Ø INNER TUBE
A
000006271##00 Round cover D. 80 75
000006291##00 Round cover D. 80 with handwheel 75
CODE DESCRIPTION Ø INNER TUBE
A B
000006281##00 Round cover dw D. 80 75 100
000006301##00 Round cover dw D. 80 with handwheel 75 100